CX-7 FWD L4-2.3L Turbo (2010)
Variable Induction Control Actuator: Testing and Inspection
VARIABLE SWIRL SHUTTER VALVE ACTUATOR INSPECTION [L3 WITH TC]
1. Remove the air hose. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
2. Disconnect the vacuum hose from the variable swirl control solenoid valve.
3. Connect a vacuum pump to the variable swirl shutter valve actuator.
4. Apply vacuum and verify that the rod moves.
-
If the rod does not move, replace the intake manifold. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
