CX-7 FWD L4-2.3L Turbo (2010)
3. Align the center line of the crankshaft position sensor and the line drawn in Step 2, then install the sensor.
4. Install the CKP sensor fitting bolts.
Tightening torque
-
5.5-7.5 Nm {57-76 kgf-cm, 49-66 in-lbf}
5. Remove the SST then install the cylinder block lower blind plug.
Tightening torque
-
18-22 Nm {1.9-2.2 kgf-m, 14-16 ft-lbf}