CX-7 FWD L4-2.3L Turbo (2010)
11. Install a new O-ring to the coupler component.
CAUTION:
-
Do not apply too much force to the coupler component.
-
Do not damage the coupler component.
12. Install the coupler component to the transaxle case.
13. Install a new coupler component lock plate.
14. Install the control valve body. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Control Valve Body Removal/Installation - AW6A-EL, AW6AX-EL
15. Install the resonance chamber. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
16. Install the TCM. See: Relays and Modules - Transmission and Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/TCM
Removal/Installation - AW6A-EL, AW6AX-EL
17. Add ATF to the specified level. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transaxle Fluid (ATF) Replacement
18. Install the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
19. Connect the negative battery cable.
20. Perform the neutral position learning. See: Testing and Inspection/Programming and Relearning
21. Perform the mechanical system test. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Mechanical System Test