mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Seat Belt Removal/Installation|Page 5636 > < Front Seat Belt Removal/Installation
Page 2
background image

9. Verify that the air bag system warning light illuminates for approx. 6 s and goes out. 

-

If the air bag system warning light dose not operate, refer to the on-board diagnostic system (air bag system) and perform inspection of the
system.  See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Flowchart

Connector Removal Note

1. Using a flathead screwdriver, lift the locking device carefully, however do not remove it.

2. Disconnect the connector.

Front Seat Belt Removal/Installation|Page 5636 > < Front Seat Belt Removal/Installation