CX-7 FWD L4-2.3L Turbo (2010)
Seat Belt Arming and Disarming: Service and Repair
Seat Belt Arming and Disarming
WARNING:
-
Handling the front seat belt (pre-tensioner seat belt) improperly can accidentally deploy the pre-tensioner seat belt, which may seriously injure
you. Read the air bag system service warnings and cautions before handling the front seat belt. See: Air Bag Systems/Service Precautions/Air Bag
System Service Warnings See: Air Bag Systems/Service Precautions/Air Bag System Service Cautions
WARNING:
-
The side air bag sensor is attached to the lower part of the B-pillar. When working around the B-pillar, disconnect the negative battery cable
avoiding excessive impact to the lower part of the B-pillar.
CAUTION:
-
The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If
this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1min or more.
