CX-7 FWD L4-2.3L Turbo (2010)
Wheel Speed Sensor: Service and Repair
Front ABS Wheel-Speed Sensor Removal/Installation
FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Perform the following procedure and remove the LF ABS wheel-speed sensor.
a. Remove the battery and battery tray. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement See: Starting and
Charging/Battery/Service and Repair/Removal and Replacement
b. Remove the air cleaner component and air hose. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair See: Engine,
Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.