CX-7 FWD L4-2.3L Turbo (2010)
Power Window Switch: Service and Repair
Power Window Main Switch Removal/Installation
POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal
and Replacement/Inner Garnish Removal/Installation)
3. Remove the front door trim. (See See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal
and Replacement/Front Door Trim Removal/Installation)
4. Disconnect the power door mirror switch connector and the power window main switch connector.
5. Remove the screws, then the power window main switch.
6. Install in the reverse order of removal.