CX-7 FWD L4-2.3L Turbo (2010)
Battery: Procedures
BATTERY RECHARGING [L3 WITH TC]
WARNING:
-
Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire, and cause serious injury.
-
Remove the battery filler caps when recharging to prevent battery deformation or damage.
CAUTION:
-
Do not quick charge for more than 30 min. It will damage the battery.
1. Remove the battery and then place it in a pan of water.
2. Remove the battery filler caps.
3. Connect a battery charger to the battery and adjust the charging current as follows.
Battery slow charge current
-
55D23L (48): 4.5-5.5 A
-
80D26L (55): 5.5-6.5 A
Battery quick charge current [30 min]
-
55D23L (48): 30 A
-
80D26L (55): 35 A
4. After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging
has been completed.
-
If not within the specification, replace the battery.
Standard voltage
-
12.4 V or more
