CX-7 FWD L4-2.3L Turbo (2010)
Control Arm: Service and Repair
Rear Upper Arm Removal/Installation
REAR UPPER ARM REMOVAL/INSTALLATION
1. Raise the trailing link to the unloaded condition with the jack.
NOTE:
-
Jacking up the rear suspension to the no-occupant position will lighten the force on the bushing and make it easier to perform the procedure.
2. Remove the rear upper arm.
3. Install the rear upper arm.
4. Inspect the rear wheel alignment. See: Alignment/Service and Repair/Rear Wheel Alignment