CX-7 FWD L4-2.3L Turbo (2010)
18. Turn the manual shaft lever to P position.
19. Connect the selector cable and install the clip.
20. Connect the TCM connector.
21. Install the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
22. Connect the negative battery cable.
WARNING:
-
If you replace the ATX or TCM, be sure to initialize the learned values and perform neutral position learning.
23. Perform the neutral position learning. See: Transmission Control Systems/Testing and Inspection/Programming and Relearning
