CX-7 FWD L4-2.3L Turbo (2010)
Control Module: Service and Repair
TCM Removal/Installation - FS5A-EL
TCM REMOVAL/INSTALLATION [FS5A-EL]
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover (LH). See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Dashboard Under Cover Removal/Installation
3. Remove the front scuff plate (LH). See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate
Removal/Installation
4. Remove the front side trim (LH). See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim
Removal/Installation
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
TCM Removal Note
1. Remove the TCM in the direction of the arrow shown in the figure.