CX-7 FWD L4-2.3L Turbo (2010)
Shifter A/T: Testing and Inspection
Selector Lever Inspection
SELECTOR LEVER INSPECTION
1. Turn the ignition switch to the ON position. (engine off)
2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when shifted from P position to M range.
5. Verify that the positions of the selector lever and the indicator are aligned.
FS5A-EL
-
If there is any malfunction, adjust the TR switch. See: Sensors and Switches - A/T/Transmission Position Switch/Sensor/Adjustments
AW6A-EL, AW6AX-EL
-
If there is any malfunction, perform the neutral position learning. See: Transmission Control Systems/Testing and Inspection/Programming
and Relearning
6. Verify that the vehicle operates in each selected range.
