CX-7 FWD L4-2.3L Turbo (2010)
Transmission Position Switch/Sensor: Adjustments
TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT [FS5A-EL]
CAUTION:
-
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
1. Select the selector lever to N position.
2. Disconnect the TR switch connector.
a. Disconnect the negative battery cable.
b. Remove the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
c. Disconnect the TR switch connector.
3. Loosen the TR switch.
a. Remove the under cover.
b. Remove the clip and disconnect the selector cable from manual shaft lever.
c. Loosen the TR switch installation bolts.
4. Adjust the TR switch.
a. Verify that the manual shaft is aligned with N position.