CX-7 FWD L4-2.3L Turbo (2010)
NOTE:
-
The boot band does not need to be removed unless it is being replaced.
1. Remove the boot clamp with end clamp pliers as shown and discard the clamp.
Boot Band (Transaxle Side) Disassembly Note
1. Pry up the locking clips using a screwdriver.
2. Pull back the end of the band.
Outer Ring Disassembly Note
1. Mark the outer ring and the shaft for proper assembly.
2. Remove the clip.
3. Remove the outer ring.
Snap Ring, Tripod Joint Disassembly Note
1. Mark the shaft and tripod joint for proper assembly.
2. Remove the snap ring using snap-ring pliers.