CX-7 FWD L4-2.3L Turbo (2010)
Pressure Regulating Solenoid: Testing and Inspection
Solenoid Valve Inspection - FS5A-EL
SOLENOID VALVE INSPECTION [FS5A-EL]
CAUTION:
-
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
Primary Control Valve Body
On-vehicle inspection
1. Disconnect the coupler component connector.
a. Disconnect the negative battery cable.
b. Remove the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
c. Disconnect the coupler component connector.
2. Measure the resistance between the coupler component terminals.
-
If there is any malfunction, inspect the coupler component for continuity.
If coupler component has no malfunction, perform the "Off-vehicle inspection".
Solenoid valve specification
Operating inspection
CAUTION:
-
Do not apply battery position voltage to terminals for more than 3 s.
NOTE:
-
Because the operation sound of the solenoid valve is small, perform inspection in a quiet place.