CX-7 FWD L4-2.3L Turbo (2010)
Wiper Arm: Service and Repair
Rear Wiper Arm and Blade Removal/Installation
REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Adjust the rear wiper arm and blade. See: Adjustments/Rear Wiper Arm and Blade Adjustment
Rear Wiper Arm Installation Note
1. Clean the rear wiper arm connector shaft using a wire brush before installing the rear wiper arm.
