CX-9 AWD V6-3.7L (2008)
Parking Assist Control Module: Procedures
CUSTOMIZED FUNCTION SETTING PROCEDURE
1. Connect the M-MDS to the DLC-2.
NOTE: The BSM can be customized using the IDS only.
2. After vehicle identification, the following can be selected from the IDS initialization screen.
1. Select "Module Programming".
3. Then, select items from the screen menu in the following order.
1. Select "Programmable Parameters".
2. Select "Personality".
4. Select the item name, and than select either "Enabled/Disabled".
Items
-
BSM buzzer