CX-9 AWD V6-3.7L (2008)
Front Door Window Motor: Testing and Inspection
POWER WINDOW MOTOR INSPECTION
Front Side
1. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor
operation.
-
If the power window motor does not operate as indicated in the table, replace it.
CAUTION: If the power window motor temperature is high, the motor may not rotate due to the motor internal bimetal function. Leave
it untouched for about 3 min to cool it down, then reinspect.
2. Connect the battery positive voltage to power window motor terminal D and connect terminal C to ground.
3. Operate the power window motor and measure the voltage at terminals A and B.
-
If there is any malfunction, replace the power window motor.
Voltage
-
Pulse: max. 12 V/mm.0 V
Rear Side
1. Apply battery positive voltage and connect the ground to the power window motor terminals, and then inspect the power window motor operation.
-
If the power window motor does not operate as indicated in the table, replace it.
CAUTION: If the power window motor temperature is high, the motor may not rotate due to the motor internal bimetal function. Leave
it untouched for about 3 min to cool it down, then reinspect.
