mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Card Key Battery Replacement [Advanced Keyless System]|Page 7108 > < Engine Controls - Cold Engine Ping/Spark Knock|Page 7105
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair
Card Key Battery Replacement [Advanced Keyless System]

CARD KEY BATTERY REPLACEMENT [ADVANCED KEYLESS SYSTEM]

1. Pull out the auxiliary key.

2. Replace the cap using a flathead screwdriver, then rotate and remove the cap.

CAUTION:  Do not turn the cap excessively. The cap may be damaged.

3. Insert a flathead screwdriver into the crack and press the battery out.

4. Insert the new battery (CR2025) with the positive pole (+) facing the (+) mark on the cap.

Battery specification

Lithium CR2025 x 1

Card Key Battery Replacement [Advanced Keyless System]|Page 7108 > < Engine Controls - Cold Engine Ping/Spark Knock|Page 7105