mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Removal and Replacement|Page 7310 > < Body - Sunroof Is Inoperative|Page 7307
Page 1
background image

Sunroof / Moonroof Module: Removal and Replacement

Glass Panel

GLASS PANEL REMOVAL/INSTALLATION

1. Fully close the glass panel.
2. Fully open the sunshade.

3. Remove the screws, and then remove the glass panel.
4. Peel the weatherstrip off the glass panel.
5. Install in the reverse order of removal.
6. Adjust the glass panel. (See GLASS PANEL ADJUSTMENT.)

Front Drain Hose

FRONT DRAIN HOSE REMOVAL

1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:

1. A-pillar trim.
2. Front scuff plate inner.
3. Rear scuff plate inner.
4. Front seat belt lower anchor installation bolt (Driver side).
5. B-pillar lower trim .
6. Front seat belt upper anchor installation bolt.
7. B-pillar upper trim.
8. Trunk box.
9. Seat side box.

10. Trunk end trim.
11. Third-row seat.

Removal and Replacement|Page 7310 > < Body - Sunroof Is Inoperative|Page 7307