CX-9 AWD V6-3.7L (2008)
Brake Caliper: Service and Repair
Caliper (Front) Disassembly/Assembly
CALIPER (FRONT) DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of removal.
Piston Disassembly Note
Warning
^
When compressed air is blown into the caliper body, injury to a finger or other part from pinching could result from the piston springing
up. When blowing in compressed air, do not place your fingers between the piston and caliper body when performing the work.
Caution
^
The piston could be damaged if blown out with great force. Blow the compressed air slowly to prevent the piston from suddenly popping
out.
1. Place the SST in the caliper, then blow compressed air through the hole to force the piston out of the caliper.
