CX-9 AWD V6-3.7L (2008)
2. Tap the front oil seal in evenly using the SST and a hammer.
Substitution SST
^
49 G028 203
Outer diameter: 58-70 mm (2.3-2.7 in)
Inner diameter: 56-58 mm (2.3-2.2 in)
Tube with board thickness 2 mm (0.079 in) or more
Crankshaft Pulley Installation Note
Note
^
Lubricate the contact surface (exterior area of inner diameter) of the front oil seal with clean engine oil.
1. Install the crankshaft pulley, washer, and SST to the crankshaft.
2. Tighten the SST nut and install the crankshaft pulley.
Crankshaft Pulley Lock Bolt Installation Note
1. Set a flathead screwdriver to the drive plate in the position indicated in the figure to lock the crankshaft rotation.
