CX-9 AWD V6-3.7L (2008)
2. Knock the crimped portion of the locknut outward using a small chisel and a hammer.
3. Remove the locknut.
4. Install a spare nut onto the driveshaft so that the nut is flush with the end of the drive shaft.
5. Tap the nut with a copper hammer to loosen the drive shaft from the front wheel hub.
6. Separate the drive shaft from the wheel hub.
Brake Caliper Removal Note
1. Remove the brake caliper component from the steering knuckle and suspend it out of the way using a cable.
Wheel Hub Removal Note
1. Remove the wheel hub using the SSTs.
Substitution SST
^
49 G033 105
Outer diameter: 37 - 43 mm (1.5 - 1.6 in)
