CX-9 AWD V6-3.7L (2008)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.7]
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Remove the following part for easier access.
-
Remove the resonance chamber and air cleaner assy.
4. Disconnect the CMP sensor connector
5. Remove the CMP sensor.
NOTE: Lubricate the CMP O-ring seal with clean engine oil.
6. Install in the reverse order of removal.
