CX-9 AWD V6-3.7L (2008)
Actuator: Testing and Inspection
AWD SOLENOID INSPECTION
1. Disconnect the negative battery cable.
2. Disconnect the AWD solenoid connector.
3. Measure resistance between AWD solenoid connector terminals A and B.
^
If the resistance is not within the specification, replace the coupling unit.
AWD solenoid resistance
1.5 - 2.0 ohms
(Rear differential oil temperature at 20°C (68°F))
4. Connect the AWD solenoid connector.
5. Connect the negative battery cable.
