CX-9 AWD V6-3.7L (2008)
14. Glove compartment.
15. Front side trim.
16. Console.
17. Console cover.
18. Console panel.
19. Side wall.
20. Dashboard under cover.
21. Front console box.
22. lndicator panel.
23. Front console box mat.
24. Decoration panel.
25. Headliner.
26. RES unit cover (Vehicles with RES).
27. Assist handle.
28. Sunvisor.
29. Front map light.
30. D-pillar trim.
31. Third-row seat belt upper anchor installation bolt.
32. C-pillar trim.
33. Second-row seat belt upper anchor installation bolt.
34. Roof side trim.
35. Trunk side trim.
36. Third-row seat belt lower anchor installation bolt.
37. Third-row seat.
38. Trunk end trim.
39. Seat side box.
40. Trunk box.
41. B-pillar upper trim.
42. Front seat belt upper anchor installation bolt.
43. B-pillar lower trim.
44. Front seat belt lower anchor installation bolt (Driver side).
45. Rear scuff plate inner.
46. Front scuff plate inner.
47. A-pillar trim.
6. Install the seaming welt.
Rear Drain Hose
REAR DRAIN HOSE REMOVAL
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts;