CX-9 AWD V6-3.7L (2008)
3. Put the pre-tensioner seat belt inside the tire and secure it to the tire by wrapping a wire (cross section of 1.25 sq.mm {0.002 sq.in} or more)
through the tire and the bolt installation holes at least 4 times.
WARNING: If the pre-tensioner seat belt is not properly installed to the tire, serious injury may occur when the pre-tensioner part is
operated (deployed). When installing the pre-tensioner seat belt to the tire, make sure the pre-tensioner part is inside the tire.
4. Stack the tire with the pre-tensioner seat belt on to of two tires without wheels. Stack a tire without a wheel on top of the tire with the pre-tensioner
seat belt, and then stack another tire with a wheel on the very top.
5. Secure the tires with wire.
6. Connect the SST (Deployment tool) to the SST (Adapter harness).
7. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the
negative battery terminal.
8. Verify that the red lamp on the SST (Deployment tool) is illuminated.
9. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.