CX-9 AWD V6-3.7L (2008)
NOTE:
If incorrect CCA rating is entered, it will result in a false and invalid DTC authorization code from the tester. This will also result in
unnecessary/improper replacement of batteries.
REPAIR PROCEDURE
Mazda Micro49l Battery Tester Controls:
1. Using the Mazda Micro491 Battery Tester, attach the red probe to the positive battery terminal and the black probe to the negative terminal.
NOTE:
The tester's display screen will automatically activate for batteries above 1 volt. For batteries that are below 1 volt, it may be necessary to charge
the battery for 30 minutes to raise the battery above 1 volt for testing and DTC retrieval.
2. Select the appropriate "IN-VEHICLE" or "OUT-OF-VEHICLE" test by scrolling with the UP and DOWN arrows, then press ENTER.
NOTE:
When performing an "In-Vehicle" battery test, make certain that the key is in the OFF position and all electrical accessories and lights are turned
off. Be sure that no diagnostic equipment is attached to the vehicle or DLC.
