CX-9 AWD V6-3.7L (2008)
Power Steering Pump: Removal and Replacement
POWER STEERING OIL PUMP REMOVAL/INSTALLATION
1. Remove the windshield wiper arm and blade.
2. Remove the cowl grill.
3. Remove the windshield wiper motor.
4. Remove the cowl panel.
5. Remove the right side splashing shield.
6. Remove the drive belt.
7. Remove in the order indicated in the table.
8. Install in the reserve order of removal.
Power Steering Fluid Tank Removal Note
1. Remove the coolant reserve tank with the hose still connected, and position the coolant reserve tank out of the way.