CX-9 AWD V6-3.7L (2008)
5. Remove the presilencer insulator.
6. Remove the propeller shaft.
7. Remove the rear ABS wheel-speed sensor.
8. Remove the rear coil spring.
9. Remove in the order indicated in the table.
10. Install in the reverse order of removal.
11. Inspect for rear wheel alignment, and adjust it as necessary.
Caliper Component Removal Note
1. Remove the rear brake caliper component, and suspend it with a cable in a location out of the way.
Rear Differential And Rear Crossmember Component Removal Note
