CX-9 AWD V6-3.7L (2008)
1. Support the rear lower arm inner side using a garage jack.
2. Loosen the rear lower arm outer side bolt.
3. Lower the rear lower arm inner side slowly.
4. Remove the rear coil spring.
Rear Coil Spring Installation Note
Warning:
^
Installing the coil spring is dangerous. The coil spring could fly off, and cause serious injury or death.
1. Install the rear coil spring so that the lower end of the rear coil spring is seated on the step of the rear lower spring seat.
2. Position the jack under the lower arm inner side and compress the rear coil spring slowly.
3. Support the rear lower arm outer side and raise the rear suspension to the unloaded condition with a separate garage jack.
4. Install the lower arm inner side bolt.
Tightening torque
^
120 - 163 Nm (12.3 - 16.6 kgf-m, 89 - 120 ft-lbf)
5. Tighten the rear lower arm outer side bolt.
Tightening torque
^
120 - 163 Nm (12.3 - 16.6 kgf-m, 89 - 120 ft-lbf)
