CX-9 AWD V6-3.7L (2008)
Control Unit: Testing and Inspection
AWD CONTROL MODULE INSPECTION
Note:
^
AWD CM terminal voltage can vary depending on measuring conditions and vehicle aging, resulting in misdiagnosis. Therefore, it is necessary
to perform an overall inspection of the input/output systems and AWD CM to determine which part is malfunctioning.
^
With the AWD CM connector connected, measure voltage by connecting the voltmeter negative lead to the body ground and positive (+) lead
to each AWD CM terminal.
1. Measure voltage or resistance at each AWD CM terminal using a voltmeter and an ohmmeter.
^
If not as specified, replace the AWD CM.
Terminal Voltage List (Reference)