CX-9 AWD V6-3.7L (2008)
Over-Run Clutch Assembly: Removal and Replacement
COUPLING COMPONENT REMOVAL/INSTALLATION
1. Drain the rear differential oil into a container.
2. Remove the under guard (LH).
3. Remove the presilencer.
4. Remove the presilencer insulator.
5. Remove the propeller shaft.
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal.
8. Add rear differential oil.
Front Differential Mounting Rubber Removal Note
1. Detach clips as shown in the figure.
