CX-9 AWD V6-3.7L (2008)
9. Apply body primer on the body as shown in the figure, then allow it to dry for approx. 30 min.
CAUTION: To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
10. After the primer has dried, apply 11 mm (0.43 in) in thickness, 5 mm (0.20 in) in width of sealant using a sealant gun. Where it is not applied
properly, correctly apply it using a spatula.
11. Align the window side fastener with the bead on the body and adhere.
12. Press the quarter window glass until the quarter window glass fastener and stud pin are locked, and then install the quarter window glass.
13. Install the following parts:
1. D-pillar trim
2. Third-row seat belt upper anchor installation bolt
3. C-pillar trim
4. Roof side trim
5. Second-row seat belt upper anchor installation bolt
