mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine Performance - Driveability Improvement Kit|Page 876 > < Engine Performance - Driveability Improvement Kit|Page 874
Page 14
background image

FUEL HOSE ROUTING DIAGRAM

a.

Connect the hoses which have been disconnected in STEP 3, PAGE 12.

10.

Final check.

a.

Connect the negative battery cable and start the engine.

b.

Check for fuel leaks.

c.

Check the float level at the sight glass. It must be between the center and the top of the dot. If not, re-adjust.

d.

Turn the engine off and install the air cleaner.

Modified Thermostat & Water Thermo Switch Field Installation Procedures (83 GLC Only)

STEP 1    

Inspecting for previously-installed modified Thermostat and Water Thermo Switch.

1)

If the VIN of the vehicle is later than those VIN's below, the modified parts have been installed during production.

JM1BD221 E0750001 JM1BD231 E0750001 JM1BD241 E0750001

2)

Look for a white paint mark on the Thermostat Housing and on the Water Thermo Switch. If a white paint mark is present the modified parts have
already been installed.

Thermostat Assembly

Engine Performance - Driveability Improvement Kit|Page 876 > < Engine Performance - Driveability Improvement Kit|Page 874