Mazdaspeed3 L4-2.3L Turbo (2010)
Manifold Pressure/Vacuum Sensor: Testing and Inspection
Manifold Absolute Pressure (MAP) Sensor Inspection
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [L3 WITH TC]
1. Connect the M-MDS to the DLC-2.
2. Switch the ignition to ON.
3. Verify that the voltage (M-MDS PID: MAP) within the specification. See: Computers and Control Systems/Testing and Inspection/Component
Tests and General Diagnostics/PCM Inspection
-
If not as specified, replace the MAP sensor.
See: Intake Air Temperature Sensor/Service and Repair