Mazdaspeed6 L4-2.3L Turbo (2006)
Driver/Vehicle Information Display: Customer Interest
Instruments - No Information Display/Clock Runs Too Fast
TSB: 09-021/06
2006 MAZDA6 AND MAZDASPEED6 - INFORMATION DISPLAY DOES NOT ILLUMINATE/CLOCK RUNS FAST IN SUB-ZERO
TEMPERATURE
APPLICABLE MODEL(S)/VINS
2006 Mazda6 vehicles produced before January 3, 2006
2006 MAZDASPEED6 vehicles with VINs lower than JM1GG****6*104319
DESCRIPTION
In sub zero temperature, some vehicles may experience no illumination from the information display when the ignition is turned on. Also, the clock runs
too fast and may gain more than 20 minutes per week.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1.
Verify customer concern.
2.
Record customer's preset radio stations.
3.
Disconnect negative battery cable.
4.
Replace the information display according to the Workshop Manual (section 09-22 INFORMATION DISPLAY REMOVAL/INSTALLATION)
with an exchange unit from United Radio.
5.
Reconnect negative battery cable.
6.
Record customer's radio preset radio stations.
7.
Restore vehicle's "Auto Open/Close" and "Anti-Pinch" window features by performing "POWER WINDOW INITIALIZATION PROCEDURE"
POWER WINDOW INITIALIZATION PROCEDURE
1.
Turn ignition to ON position.
2.
From driver's seat ensure window lockout switch is NOT depressed.
