Mazdaspeed6 L4-2.3L Turbo (2006)
5. Security access begins and the WDS or equivalent displays the "OUT-CODE".
NOTE: When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the
"OUT-CODE".
6. Input the "IN-CODE" that corresponds to the "OUT-CODE " displayed on the WDS or equivalent screen.
7. Select "CARD KEY PROGRAMMING" from the WDS or equivalent screen menu.
NOTE: After Step 7 is completed and the card key programming is activated, the door lock actuator operates to lock, and then operates to unlock.
8. Press the unprogrammed card key UNLOCK button twice.
NOTE: After Step 8 is completed and the card key is programmed, the door lock actuator operates to lock, and then operates to unlock.
9. If programming more card keys, remove the supplementary key once, and then repeat the procedure from Step 7 by following the instructions on
the WDS or equivalent screen.
