mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Tire House Trim Removal/Installation|Page 7024 > < Tire House Trim Removal/Installation|Page 7022
Page 1
background image

Trunk / Liftgate Interior Trim Panel: Service and Repair
Trunk Side Trim Removal/Installation

TRUNK SIDE TRIM REMOVAL/INSTALLATION

Sport Sedan

1. Remove the trunk end trim.

2. Remove the fasteners, then remove the trunk side trim.
3. Install in the reverse order of removal.

5-Door

1. Remove the following parts:

1. Trunk end trim
2. Rear scuff plate
3. Tire house trim
4. Trunk side upper trim

2. Remove the trunk side trim cover.

3. Remove the cargo hooks.
4. Remove the fasteners.
5. Pull the trunk side trim toward you, then disengage clips A from the body.
6. Install in the reverse order of removal.

Spot Wagon

Tire House Trim Removal/Installation|Page 7024 > < Tire House Trim Removal/Installation|Page 7022