mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Tire House Trim Removal/Installation|Page 7027 > < Tire House Trim Removal/Installation|Page 7025
Page 2
background image

5-Door

1. Disconnect the negative battery cable. (LH only)
2. Remove the rear scuff plate.
3. Remove the tire house trim.
4. Remove the cargo compartment light. (LH only)
5. Remove the rear seat remote lever.

6. Remove the screw.
7. Pull the trunk side upper trim toward you, then disengage clips A from the body.
8. Install in the reverse order of removal.

Sport Wagon

1. Remove the rear scuff plate.
2. Remove the tire house trim.
3. Remove the rear seat remote lever.

4. Remove the cargo hooks.
5. Remove the screw.
6. Pull the trunk side upper trim. Toward you, then remove the hooks A, C, D, F and clips B, pin E from the body.
7. Remove the trunk side upper trim.
8. Install in the reverse order of removal.

Trunk Side Trim Removal/Installation

TRUNK SIDE TRIM REMOVAL/INSTALLATION

Sport Sedan

1. Remove the trunk end trim.

Tire House Trim Removal/Installation|Page 7027 > < Tire House Trim Removal/Installation|Page 7025