Mazdaspeed6 L4-2.3L Turbo (2006)
Crossmember component, Differential And Drive Shaft Removal Note
1. Support the differential with a jack, and remove the nut.
Warning:
^Removing the crossmember component, differential and drive shaft is dangerous. The crossmember component, differential and drive shaft
could fall and cause serious injury or death. Verify that the jack securely supports the differential lower side.
2. Remove the crossmember component, differential and drive shaft.
Rear Crossmember Bushing Removal Note
1. Remove the bushing using a screw driver being careful not to damage the rear crossmember.
Rear Crossmember Bushing Installation Note
1. Set the bushings as shown in the figure.
