mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Campaign MPP02 - Paint Overspray Removal|Page 7270 > < Campaign MPP02 - Paint Overspray Removal|Page 7268
Page 3
background image

PART(S) INFORMATION

To order 3M product, call (877) 666-2277 or go to www.3M.com/automotive

NOTE:

The part number listed is not a Mazda part number. Parts must be ordered from 3M.

WARRANTY INFORMATION

NOTE:

^

This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for
warranty term information.

^

Additional diagnostic time cannot be claimed for this repair.

IRON PARTICLES/INDUSTRIAL FALL-OUT/ACID RAIN DAMAGE

Paint may be damaged by hot iron particles (dust) that are generated by manufacturing facilities, rail shipment, etc. and mechanically bond to a
vehicle's painted surfaces. These particles combined with moisture and temperature create an acid which causes the iron to corrode and damage
(enter) the paint surface. Paint may also be damaged by industrial fallout and acid rain. These conditions generate corrosive compounds that fall on
the vehicle's painted surfaces. When combined with moisture and temperature, chemical compounds are created that damage (etch) the paint
surface. To remove these contaminates, a Decontamination Kit is available which will repair these concerns. This kit includes the following items
which will repair up to ten (10) vehicles:

NOTE:

^

This repair information supersedes the applicable information located in the PAINT DAMAGE REPAIR GUIDE (9999-95-044N-97)

^

No polishing, compounding, color sanding, or repainting should be done before this procedure is performed. This procedure uses products

Campaign MPP02 - Paint Overspray Removal|Page 7270 > < Campaign MPP02 - Paint Overspray Removal|Page 7268