Mazdaspeed6 L4-2.3L Turbo (2006)
1.
Prepare a lubricant by filling a detail spray bottle with one (1) oz. of car wash soap per one (1) quart of water.
2.
Spray lubricant on the area to be repaired.
3.
Place the clay bar in the palm of your hand.
4.
Wipe the affected area in a side to side and up and down motion. Continue until the paint overspray is removed and the area is smooth to the
touch.
NOTE:
^
Always keep the area well lubricated
^
Use minimal pressure
^
If the clay contacts the ground, make sure to fully wash and remove any debris that may be stuck to it.
5.
Repeat Steps 2 - 4 on all remaining affected areas (including the glass if necessary).
6.
Fill out a blue "Campaign Label" (9999-95-065A-05) with the Campaign No: "MPP02", your dealer code, today's date, and affix it to the vehicle's
hood.
7.
Return vehicle to customer or dealer inventory.
