Mazdaspeed6 L4-2.3L Turbo (2006)
1. Remove the spring pin and clevis pin.
2. Loosen locknut D and turn rod C to align the holes in the fork and in the pedal.
3. Install the clevis pin and the spring pin.
4. Tighten locknut D.
Tightening torque 15.7 - 21.6 Nm (1.60 - 2.20 kgf-m, 11.6 - 15.9 ft. lbs.)
5. Check the pedal height and the brake light operation.
Pedal-to-floor Clearance Inspection
1. Start the engine and depress the brake pedal with a force of 147 N (15.0 kgf, 33.0 lbs.)
2. Verify that the distance from the floor panel to the pedal pad center is as specified when the pedal is depressed. If the distance is less, than
specified, check for air in brake system.
Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N 115.0 kgf, 33 lbs.)) 68 mm 12.7 inch) min.
