Mazdaspeed6 L4-2.3L Turbo (2006)
2. Turn ignition switch on, verify the voltage between terminals D and ground terminal E under the following conditions.
1) Measure combined sensor voltage under static condition.
Voltage 2.3 - 2.7 Volts
2) Measure voltage at output terminal D and ground terminal E when the combined sensor is rotated left and right.
Caution:
^
Be careful when turning the combined sensor rotation position while it is in a reversed state because the rotation direction and voltage will
be reversed.
Voltage Right rotation: fluctuation between 2.5 - 4.62 Volts
Left rotation: fluctuation between 2.5 - 0.33 Volts
Forward-G Sensor Inspection
1. Connect the connector.
2. Turn ignition switch on, verify the voltage between terminals A and ground terminal E under the following conditions.
1) Horizontal
Voltage 2.2 - 2.8 Volts
2) Acceleration (inclined 90° from horizontal)
Voltage 3.1 - 3.9 Volts
3) Deceleration (decline 90° from horizontal)
