Mazdaspeed6 L4-2.3L Turbo (2006)
Oil Pan: Service and Repair
OIL PAN REMOVAL/INSTALLATION [L-3 WITH TC]
Warning:
-
Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.
-
A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never
work around or under a lifted vehicle if it is not securely supported on safety stands.
-
Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water
immediately after working with engine oil.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the engine oil.
4. Remove the engine front cover.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Refill with the specified type and amount of the engine oil,
8. Start the engine and confirm that there is no oil leakage.
-
If there is oil leakage, repair or replace the applicable part.
9. Inspect the oil level.
Oil Pan Removal Note
1. Remove the oil pan using the separator tool.
Oil Pan Installation Note
