Mazdaspeed6 L4-2.3L Turbo (2006)
Front Crankshaft Seal: Service and Repair
FRONT OIL SEAL REPLACEMENT [L3 WITH TC]
1. Disconnect the negative battery cable.
2. Remove the front tire (RH).
3. Remove the under cover.
4. Remove the splash shield (RH).
5. Remove the charge air cooler.
6. Remove the high pressure fuel pump.
7. Remove the ignition coils.
8. Disconnect the OCV connectors.
9. Disconnect the CMP sensor connector.
10. Disconnect the P/S oil pump connector.
11. Remove the ventilation hose.
12. Remove cylinder head cover.
13. Remove the drive belt.
14. Disconnect the front drive shaft (RH) from the joint shaft.
15. Remove the CKP sensor.
16. Remove in the order indicated in the figure.
17. Install in the reverse order of removal.
18. Bleed the air from the cooling system.
Crankshaft Pulley Lock Bolt Removal Note
