Mazdaspeed6 L4-2.3L Turbo (2006)
1. Remove the cylinder block lower blind plug and install the SST.
2. Verify that cylinder No.1 is at TDC of the compression stroke. (Position crank weight contacts SST.)
3. Install the SSTs to the crankshaft pulley and lock the crankshaft against rotation.
Front Oil Seal Removal Note
1. Remove the oil seal lip using a razor.
2. Remove the oil seal using a flathead screwdriver with the tip protected by a rag to prevent crankshaft oil seal damage.
Front Oil Seal Installation Note
1. Apply clean engine oil to a new oil seal.
2. Insert the oil seal into the engine front cover.
3. Tap in the oil seal using the SST.
Front oil seal press-in amount 0 - 0.5 mm (0 - 0.019 inch)
Crankshaft Pulley Lock Bolt Installation Note
