Mazdaspeed6 L4-2.3L Turbo (2006)
40. Install a new engine front cover lower blind plug.
Tightening torque 10.0 - 14.0 Nm (102.0 - 142.7 kgf-cm, 73.8 - 103.2 inch lbs.)
41. Connect the front drive shaft (RH) with the joint shaft.
42. Install the drive belt.
43. Install the cylinder head cover.
44. Install the ventilation hose.
45. Connect the P/S oil pump connector.
46. Connect the CMP sensor connector.
47. Connect the OCV connector.
48. Install the ignition coils.
49. Install the high pressure fuel pump.
50. Install the charge air cooler.
51. Install the splash shield (RH).
52. Install the under cover.
53. Install the front tire (RH).
54. Connect the negative battery cable.
55. Bleed the air from the cooling system.
