mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - Mode Switch Won't Go Into Recirculation Mode|Page 6343 > < Condenser HVAC|Testing and Inspection|Page 6334
Page 1
background image

Control Assembly: All Technical Service Bulletins
A/C - Mode Switch Won't Go Into Recirculation Mode

TSB: 07-002/06

2003 - 2006 MAZDA6 

AIR INTAKE SELECTOR MODE SWITCH FAILURE

APPLICABLE MODEL(S)/VINS

2003 - 2006 Mazda6 vehicles equipped with Manual Air Conditioning System

DESCRIPTION

Some vehicles may experience an air selector mode switch that will not switch into recirculation mode.
This condition may be cause by a lack of continuity in the mode switch.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Record customer's pre-set radio stations.

3.

Disconnect negative battery cable.

4.

Remove climate control unit assembly according to Workshop manual (section 07-40 [] CLIMATE CONTROL UNIT
DISASSEMBLY/ASSEMBLY L3, AJ).

A/C - Mode Switch Won't Go Into Recirculation Mode|Page 6343 > < Condenser HVAC|Testing and Inspection|Page 6334